R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Quantity: 4
‹› For the cowl panel trim
7
Washer
‹› Insert between the spring nut and trim
8
Cowl panel trim
‹› Removing and installing => [ Cowl Panel Trim ] See: Cowl Panel Trim
9
Spring nut
‹› For the quick-release fastener
10
Screw
‹› 18 Nm
11
Screw
‹› 18 Nm
12
Headlamp and left wheel housing liner trim
‹› Removing and installing => [ Headlamp and Wheel Housing Liner Trim ] See: Fender/Front Fender/Front Fender Liner/Service and
Repair/Headlamp and Wheel Housing Liner Trim
13
Left rubber seal
‹› For the wheel housing liner
14
Washer
‹› Insert between the spring nut and trim
15
Quick release screw
‹› Quantity: 3
‹› For the headlamp and left wheel housing liner trim
16
Washer
‹› Insert between the spring nut and trim
17
Quick release screw
‹› Quantity: 2
‹› For the bumper cover trim
18
Bumper cover trim
‹› Removing and installing => [ Bumper Cover Trim ]