R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Window Regulator Switch (in RF door) (E107)
6
Entry Lamp
7
Passive Rear Reflector
8
Passenger Compartment Monitoring Switch (E183)/Alarm System -Off- Switch (E217)
9
Securing Clip with Seal
‹› For door trim
CAUTION!
‹› For proper crash sensor (pressure sensor) function, ensure door does not leak.
‹› The door trim panel clips seal the system. Replace the clips, if necessary.
‹› Follow safety measures when working with front side airbag crash sensors (pressure sensors). Refer to => [ Front Side Airbag Crash
Sensors Safety Precautions ] See: Restraint Systems/Air Bag Systems/Service Precautions/Front Side Airbag Crash Sensors Safety
Precautions.
10
Door Trim
‹› Removing and installing, refer to => [ Door Trim ] See: Door Trim
11
Bolt
‹› For the speaker trim
‹› Quantity: 6
‹› 0.3 Nm
12
Bolt
‹› For inside door release mechanism
‹› Quantity: 4
‹› 0.6 Nm
13
Interior Door Mechanism
‹› Removing and installing, refer to => [ Inside Door Release Mechanism ] See: Door Trim
14
Driver's Interior Locking Switch (E150) (Central Locking Switch)
15
Mid-range Speaker Trim
‹› Passenger side => [ Passenger Side Pull Handle ]
‹› Removing and installing, refer to => [ Mid-Range Speaker Trim ] See: Door Trim
16
Switch Frame
‹› for the luggage compartment release switch (E164) and fuel tank lid unlock button (E319)
17
Luggage Compartment Release Switch (E164)/Fuel Tank Lid Unlock Button (E319)
18
Pull Handle
‹› Passenger side => [ Passenger Side Pull Handle ]
‹› Removing and installing, refer to => [ Passenger Pull Handle ] See: Door Trim