R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Front Door Weatherstrip: Service and Repair
Door Seal and Inner Window Shaft Strip
Door Seal and Inner Window Shaft Strip
Removing
Proceed as follows:
-
Remove the door trim.
-
Remove the window shaft strip - 1 - upward - arrow A -.
-
Carefully loosen the bonded connection - 2 - and remove the retaining studs - 3, 4 and 5 - on the outer sides from the door shell.
-
Remove the door seal and the window shaft strip - 7 - all around.
Installing