R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› The seal must engage behind the lower corners of the side window.
-
Install the inner door seal molded piece on the body flange in the lower B-pillar and sill panel area.
-
Install the inner door seal molded piece on the body flange in the lower A-pillar and sill panel area.
-
Install the inner door seal molded piece on the sill panel body flange.
-
Remove the protective film on the double-sided adhesive tape on the inner door seal molded piece - A - in the side window area - C -. Press the
double-sided adhesive tape onto the body completely.