R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Hood Latch: Service and Repair
Front Lid Lock
Front Lid Lock
Removing
Proceed as follows:
-
Remove the luggage compartment liner.
-
Disconnect electrical harness connector - 1 -.
-
Remove bolts - arrows -.
-
Remove the front lid lock - 2 - down out of the lock carrier.
-
Disengage the front lid emergency release cable => [ Front Lid Emergency Release Cable and Cable Operating Lever Assembly Overview ] See:
Service and Repair/Front Lid Emergency Release Cable and Cable Operating Lever Assembly Overview.
Installing
‹› Tightening specifications => [ Front Lid Lock and Positioning Motor Assembly Overview ] See: Service and Repair/Front Lid Lock and
Positioning Motor Assembly Overview.
Installation is reverse of removal, but note the following:
-
Adjust the front lid => [ Front Lid, Adjusting ] See: Adjustments.