R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Trunk / Liftgate Hinge: Removal and Replacement
Engine Compartment Lid Hinge
Removing
Proceed as follows:
-
Remove the engine compartment lid => [ Engine Compartment Lid ] See: Service and Repair/Removal and Replacement/Engine Compartment Lid
.
-
Remove bolts - arrows -.
-
Remove hinge - 1 -.
Installing
‹› Tightening specifications => [ Engine Compartment Lid Assembly Overview ] See: Service and Repair/Removal and Replacement/Engine
Compartment Lid Assembly Overview.
Installation is reverse of removal, but note the following:
-
Install the engine compartment lid => [ Engine Compartment Lid ] See: Service and Repair/Removal and Replacement/Engine Compartment Lid.