R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Cowl Moulding / Trim: Service and Repair
Fresh Air Intake Grille
Fresh Air Intake Grille
Removing
-
Switch off ignition.
-
Remove the air intake unit, refer to => [ Air Intake Unit ] See: Heating and Air Conditioning/Air Duct/Service and Repair/Air Intake Unit.
-
Remove the air intake unit upper cover, refer to => [ Air Intake Unit Upper Cover ] See: Heating and Air Conditioning/Air Duct/Service and
Repair/Air Intake Unit Upper Cover.
-
Loosen the retainers - A - and remove the grille in front of the fresh air intake - B - from the air intake unit.
Installing
-
Clean the area under the air intake unit.
-
Press the grille in front of the fresh air intake - B - on until it engages audibly on the air intake unit.
-
Install the air intake unit upper cover, refer to => [ Air Intake Unit Upper Cover ] See: Heating and Air Conditioning/Air Duct/Service and
Repair/Air Intake Unit Upper Cover.
-
Install the air intake unit, refer to => [ Air Intake Unit ] See: Heating and Air Conditioning/Air Duct/Service and Repair/Air Intake Unit.