R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Underbody Cover: Service and Repair
Center Tunnel Cover
Center Tunnel Cover
Removing
Proceed as follows:
-
Remove bolts - arrows -.
‹› The center tunnel cover is secured with a total of 30 bolts.
-
Disengage the center tunnel cover - 1 - at the center vehicle underbody cover and remove it.
Installing
‹› Tightening specifications => [ Covers and Noise Insulation Assembly Overview ] See: Covers and Noise Insulation Assembly Overview.
Installation is reverse of removal, but note the following:
-
Engage the front center tunnel cover at the center vehicle underbody cover and tighten the bolts.