R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Front Fender Liner: Service and Repair
Front Wheel Housing Liners
Front Wheel Housing Liners
Removing
Proceed as follows:
‹› Front wheel removed.
-
Mark the bolts - 1 - and - 2 - for installation later.
-
Remove the bolts - 1 and 2 - and - arrows -.
-
Remove the wheel housing liner - 3 - and wheel spoiler.
Installing
‹› Tightening specifications => [ Wheel Housing Liners Assembly Overview ] See: Wheel Housing Liners Assembly Overview.
Installation is reverse of removal, but note the following:
-
Install the bolts according the markings applied during removal.