R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Installation
-
Check adjusting element adjusting nuts - 1 - for ease of movement - arrow -.
-
Install adjustment nuts all the way, but do not tighten.
-
Insert central tube in body according to markings applied.
-
Align central tube according to markings applied to A-pillar during removal.
-
Tighten left and right central tube nuts.
Further installation is performed in reverse sequence of removal, but observe the following:
Check location of instrument panel central tube
-
Insert instrument panel to test.
-
Secure the instrument panel at the left and right to the instrument panel bracket.
-
Close doors.
-
Check whether gap dimension between instrument panel and left and right doors is even.
-
Check whether height of instrument panel aligns with molding in door trim.
If the adjustment is not correct: