R8 Quattro Coupe V10-5.2L (BUJ) (2010)
If a BRT-DBL4 is not available
It is possible to learn what sensors are installed on the vehicle by viewing MVB 16. MVB 16 displays the ID of the sensor that was most recently
triggered.
1. View MVB 16 while triggering each sensor using the VAS 6287 or by letting a small amount of air out of each tire.
2. Be sure the tires are properly inflated prior to returning the vehicle to the customer. Consult the tire pressure label on the B-pillar or the Owner's
Manual for appropriate tire pressures.
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Required Parts and Tools
BRT-DBL4 Tire Pressure Sensor Tester
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.