R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Glove Compartment: Service and Repair
Glove Compartment With Knee Airbags
Glove Compartment with Knee Airbags
Removal
CAUTION!
Follow the safety precautions for pyrotechnic components.
-
Disconnect the battery ground cable with the ignition switched on.
-
Remove the glove compartment trim. Refer to => [ Glove Compartment Trim ]. See: Utility Storage Compartment/Service and Repair/Glove
Compartment Trim
-
Remove the passenger side instrument panel cover. Refer to => [ Passenger Side Instrument Panel Cover ]. See: Utility Storage
Compartment/Service and Repair/Passenger Side Instrument Panel Cover
-
Remove the bolts - arrows -.
-
Remove the glove compartment far enough so the electrical connectors can be disconnected.
CAUTION!
Before handling pyrotechnic components and belt tensioner units " discharge static electricity" by touching the door striker pin, for
example.
-
Disconnect the electrical connector on the central connector.
-
Disconnect the yellow knee airbag electrical connector.