R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Expose the hydraulic lines for convertible top operation on the rollover protection by using the (80 - 200) to pry out the bracket - 3 -.
-
Disconnect and expose electrical harness connector - 4 - for the window regulator motor.
-
Remove hydraulic pump - 5 -. The hydraulic lines are not opened.
-
Open convertible top - 1 - until the displayed position of the convertible top, convertible top fins - 2 - and convertible top compartment cover - 3 -
is reached.
-
Secure the convertible top compartment cover in the "open " position against unintentional closing.
-
Remove screws - 3 -.