R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-2527002.png)
Removal
-
Remove the seat. Refer to => [ Seat ]. See: Service and Repair/Removal and Replacement/Bucket Seats/Seat
-
Mount the (VAS 6136) on the (VAS 6095).
-
Attach the front seat to the (VAS 6136).
-
Remove side trim on sill side => [ Side Trim ]. See: Service and Repair/Removal and Replacement/Bucket Seats/Side Trim
-
Remove the seat forward/back adjustment handle.
-
Press cable sleeve in - direction of arrow A - out of bracket.
-
Disengage the seat forward/back adjustment actuating link - 1 - from the release lever - arrow B -.
-
Drill out the pop rivets - arrows - with a 4.0 mm drill and remove the relay socket and wiring harness retaining plate - 1 -.
