R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Seat Heater: Service and Repair
Seat Heating Element
Seat Heating Element
Removal
-
Remove the seat. Refer to => [ Seat ] See: Service and Repair/Removal and Replacement/Bucket Seats.
-
Remove seat pan. Refer to => [ Front Backrest and Seat pan ] See: Service and Repair/Removal and Replacement/Bucket Seats.
-
Remove seat pan cover and upholstery. Refer to => [ Seat Pan Cover and Upholstery ]. See: Service and Repair/Overhaul/Seat Upholstery,
Covers/Bucket Seat Covers and Upholstery/Seat Pan Cover and Upholstery
-
Cut out area - A - with electrical connection wire from old heating element.
-
Pull out old electrical connection wire.
-
Disconnect electrical wire connections to heating elements at seat bolsters at positions - B -.
Installation
-
Align new heating element on seat surface, remove protective foil and glue new heating element to same positions as old heating elements.
-
Route connecting wires to seat bolsters through openings in seat cushion without crossing.
-
Guide electrical connection wire downward through designated opening in seat cushion.