R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Seat Heater: Service and Repair
Backrest Heating Element
Backrest Heating Element
Removal
-
Remove cover and padding from backrest. Refer to => [ Backrest Cover and Upholstery ]. See: Service and Repair/Overhaul/Seat Upholstery,
Covers/Seat Covers and Upholstery/Backrest Cover and Upholstery
-
Disconnect cover from upholstery. Refer to => [ Backrest Cover, Separating from Upholstery ] See: Description and Operation/Seat Covers and
Upholstery.
-
Cut the wire - 3 - from the old backrest heating element - 2 -.
‹› The old backrest heating element remains on the upholstery - 1 - and the new backrest heating element is bonded over it.
Installation
-
Center the new backrest heating element - 2 - on the cushion - 1 -.
-
Remove the protective film and apply the new backrest heating element to the upholstery and the old backrest heating element.
Further installation is performed in the reverse order of removal.