R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Brake Pedal Assy: Service and Repair
Brake Pedal
Brake Pedal
Removing
-
Remove drive side trim.
-
Remove the Brake Pedal Switch (F47). Refer to => [ Brake Pedal Switch ] See: Lighting and Horns/Brake Light Switch/Service and Repair.
-
Separate the brake pedal from brake booster. Refer to => [ Brake Pedal and Brake Booster, Disconnecting and Connecting ] See: Brake Pedal and
Brake Booster, Disconnecting and Connecting.
-
Remove the nut - arrow -.
-
Remove the bolt from the bushing and brake pedal.
-
Remove brake pedal.
-
Remove the bushing.
Installing
‹› Installation is performed in reverse sequence.
CAUTION!
Make sure the bushing is inserted before assembling.
Connecting the Brake Pedal to the Brake Booster
-
Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.
-
Install the brake pedal switch. Refer to => [ Brake Pedal Switch ] See: Lighting and Horns/Brake Light Switch/Service and Repair.
CAUTION!
Make sure the brakes are working correctly before driving the vehicle for the first time.
-
Install the driver side storage compartment.