R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1346003.png)
‹› Before installing new brake pads, thoroughly clean the brake calipers of contaminants (grease-free). When doing so, pay particular attention to
removing any remaining adhesive foil on outer brake pad contact surfaces.
15
Brake Hose in Brake Caliper
‹› Install in the brake caliper.
‹› Engaging the brake hose.
‹› Brake hose in brake caliper: 12 Nm.
‹› Brake pressure line to brake hose: 16 Nm.
