R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1362003.png)
-
Insert the lower guide pins - 6 - into the brake caliper.
‹› Make sure the brake pads are installed correctly inside the brake caliper.
CAUTION!
After inserting the guide pins, press the respective retaining spring under the guide pins so the spring is under tension. If installed
incorrectly, brake pads do not remain in the correct position and will not work correctly. To keep the guide pins in the brake caliper,
press them into the caliper as far as the stop.
-
Insert the wear indicator wire into the bracket on the left caliper.
-
Connect the brake pad wear indicator connector to the top of the inner left brake pad.
-
Install wheels.
-
Check the brake fluid level and fill if necessary.
-
Install the trim in the front of the luggage compartment.
CAUTION!
After the first drive, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
CAUTION!
Make sure the brakes are working correctly before driving the vehicle for the first time.
