R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Parking Brake Lever: Service and Repair
Parking Brake Lever
Parking Brake Lever
‹› Applies to steel and ceramic brakes.
Removing
-
Release parking brake.
-
Remove center console trim.
-
Turn the adjusting nut on the compensator - 4 - until the left and right of parking brake cable - 5 - can be disengaged from the compensator.
-
Remove parking brake switch - 2 -. Refer to => [ Parking Brake Switch ] See: Electric Parking Brake Switch/Service and Repair.
-
Remove the nuts - 3 -.
-
Remove the parking brake lever from the vehicle.
Installing
Installation is performed in reverse sequence.
-
Install the parking brake switch. Refer to => [ Parking Brake Switch ] See: Electric Parking Brake Switch/Service and Repair.
-
Tension the parking brake cable - 5 - with the compensator adjusting nut - 4 -.