R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Release the clip below and remove the parking brake handle trim - 1 - forward - arrow -.
Installation
Installation is reverse of removal, but note the following:
-
Make sure the trim slides on as far as the stop an engages audibly.
Left and Right Parking Brake Trim
Removal
-
Remove rear center console. Refer to => [ Rear Center Console ] See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Center Console.
-
Remove parking brake handle trim. Refer to => [ Parking Brake Handle Trim ].
-
Remove the bolts - 3 -.
-
Pry out cover cap - 2 - with a screwdriver and remove bolt.
-
Clip the parking brake trim - 1 - apart and remove it.
Installation
Installation is reverse of removal, but note the following.
-
Make sure the trim engages together audibly.
Tightening specifications, refer to => [ Parking Brake Trim Assembly Overview ] See: Parking Brake Trim Assembly Overview.