R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Parking Brake Pad: Service and Repair
Parking Brake Pads
‹› Applies to steel and ceramic brakes.
Removing
-
Raise vehicle.
-
Remove wheels.
-
Disengage the parking brake cable on the brake caliper. Refer to => [ Parking Brake Cable, Removing from Brake Caliper and Installing ] See:
Parking Brake Cable/Service and Repair/Parking Brake Cable, Removing From Brake Caliper and Installing.
-
Press the retaining spring - 4 - down while removing the guide pins - 5 - from the brake caliper.
CAUTION!
Spring is tensioned and can cause injury when guide pins are removed.
-
Remove the retaining spring - 4 -.
‹› To prevent the brake pads from falling through the parking brake caliper, hold them in the caliper when the second guide pin is removed from the
caliper.
-
Remove the second guide pin - 3 - from the brake caliper while holding the brake pads in place.