R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Place the (VAS 6208) under the separating point.
-
Loosen the hose clamps - arrows - and remove the coolant hoses from the left coolant supply pipe.
-
Remove the bolts - 1 - and - 2 -.
-
Turn the left coolant supply pipe clockwise and up and remove it.
Installing
‹› Tightening specifications, refer to => [ Coolant Pipes Assembly Overview ] See: Coolant Pipes Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Install the air intake unit.
-
Install the battery.
-
Install the luggage compartment tray.
-
Fill with coolant. Refer to => [ Filling ] See: Service and Repair/Procedures.