R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Coolant Line/Hose: Service and Repair
Front Coolant Line
Front Coolant Line
Special tools, testers and auxiliary items required
‹› Drip Tray (VAS 6208)
‹› Hose Clip Pliers (VAS 6340)
Removing
-
Drain the coolant completely. Refer to => [ Cooling System, Draining and Filling ] See: Service and Repair/Procedures.
-
Remove the luggage compartment tray.
-
Place the (VAS 6208) under the separating point.
-
Loosen the hose clamps - arrows - and remove the coolant hoses from the front coolant return pipe.
-
Remove the bolts - 1 - and - 2 - and remove the front coolant return pipe.
Installing
‹› Tightening specifications, refer to => [ Coolant Pipes Assembly Overview ] See: Coolant Pipes Assembly Overview.