R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Water Pump: Service and Repair
Engine Mechanical
Coolant Pump
Special tools, testers and auxiliary items required
‹› Used Oil Collecting and Extracting Device (V.A.G 1782)
‹› Hose Clip Pliers (VAS 6340)
‹› Engine Bung Set (VAS 6122)
‹› Silicon-free lubricant
Removing
-
Drain engine oil.
-
Remove the thermostat and housing. Refer to => [ Coolant Thermostat with Housing ] See: Thermostat/Service and Repair/Coolant Thermostat
With Housing.
-
For the following steps, place the (V.A.G 1782) under the engine.
-
Remove the bolt - 1 - and remove the oil line.
-
Seal the open lines and connections with clean plugs from the (VAS 6122).