R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-465005.png)
‹› The placement of the camshafts must be exactly within the axial bearings - arrows - of the guide frame.
-
Rotate the guide frame with the camshafts inserted while holding them securely in the frame.
-
Rotate the camshafts until the threaded holes - arrows - face upward.
-
Check if the camshafts still lie in the guide frame axial bearings.
-
Install the camshaft clamp (T40070) in both cylinder heads and tighten the bolts - arrows - to 25 Nm.
