R8 Quattro Coupe V10-5.2L (BUJ) (2010)
CAUTION!
The lubrication system could be plugged with excess sealant.
‹› Do not apply sealant beads thicker than indicated.
-
Apply sealant beads - 1, 3 and 4 - to the clean guide frame sealing surfaces as shown in the illustration.
‹› Sealant bead thickness: 2.5 mm
‹› The guide frame must be installed within 5 minutes after applying the sealant.
-
Place the guide frame and camshafts on the cylinder head.
‹› The locating pins (T40116) prevent the guide frame from being mounted offset.
-
Install the locating pins (T40116) into the guide frame and cylinder head.
-
Install and tighten the camshaft guide frame bolts => [ Camshaft Guide Frame Tightening