R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Small diameter - arrow 1 - points to engine.
‹› Large diameter - arrow 2 - points to socket.
-
Turn the crankshaft with the (T40058) in direction of engine rotation - arrow - until the cam lobes on the hydraulic adjusting element to be
checked face up.
-
To determine the play between cam lobes and roller rocker lever, press lever down - arrow -.
-
If a 0.20 mm feeler gauge can slide between the cam lobes and roller rocker lever, replace the hydraulic adjusting element. Refer to => [