R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Accessory Drive: Service and Repair
Power Take-Off Drive Chain
Power Take-Off Drive Chain
Special tools, testers and auxiliary items required
‹› Used Oil Collecting and Extracting Device (V.A.G 1782)
‹› Socket (T40058)
‹› Locking Pin (T40071)
Removing
‹› Engine remove, transmission separated from the engine. Refer to => [ Engine and Transmission, Separating ] See: Service and Repair/Removal
and Replacement/Engine and Transmission, Separating.
‹› Secure the engine to the scissor lift platform (VAS 6131 A) or to an engine/transmission holder. Refer to => [ Engine, Securing to Engine and
Transmission Holder ] See: Service and Repair/Removal and Replacement/Engine, Securing to Engine and Transmission Holder.
-
Insert the (T40058) guide pins as follows:
‹› Small diameter - arrow 1 - points to engine.
‹› Large diameter - arrow 2 - points to socket.
-
Turn the crankshaft in the direction of engine rotation - arrow - to TDC using the (T40058).