R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-482004.png)
-
Position the spur gear unit - 1 - onto the drive shaft.
-
Turn the gears back and forth and mount the spur gear unit.
-
Tighten the bolts => [ Spur Gear Unit, Tightening
Specifications and Sequence ] See: Power Take-Off Assembly Overview.
-
Slide the dust cap - arrow - onto the end of the shaft for the A/C compressor drive spur gear with the hose clamp already installed and secure it.
The rest of the installation is in reverse order of removal, note the following:
