R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Loosen the hose clamp, disconnect the vacuum line - 1 - and move it to the side.
-
Press the release buttons and remove the crankcase housing ventilation hoses - 2, 3 and 4 -.
R8 Coupe:
-
Remove the bolts - arrows - and move the secondary air hose to the rear.
-
Remove the bolt - 1 -and push the refrigerant line to the side.
R8 Spyder:
-
Remove the nuts - 5 - and - 7 - and move the A/C system service line - 6 - to the side.
-
Remove the bolts - 3 - and the bracket - 4 -.
‹› Ignore - 1 and 2 -.
All Vehicles:
-
Disconnect the connector - 1 - on the exhaust camshaft adjustment valve 2 (N319).