R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Drive Belt: Service and Repair
Generator Bracket
Generator Bracket
Removing
-
Remove the generator.
-
On a vehicle with manual transmission, free up the shift cable on the generator bracket.
-
Remove the ribbed belt tensioning element bolt - 1 -.
-
Remove the bolt - arrows - and the generator bracket.
Installing
‹› Tightening specifications, refer to => [ Ribbed Belt Drive Assembly Overview ] See: Ribbed Belt Drive Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Install the generator.