R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Open the oil drain plugs - 1 - and - 2 - on the oil pump using a 5 mm socket.
-
Open the oil drain plug on the sealing flange - 3 - using a 30 mm TORX(R) socket.
-
Open the oil drain plug on the oil reservoir - 4 - with a 12 mm multi-point socket comparable to VAS 5301/19
-
Open the oil drain plug on the engine oil cooler - 5 - using a 12 mm multi-point socket comparable to VAS 5301/19
-
Install the oil drain plugs with new seals.
‹› Install the oil drain plugs with new gasket.
‹› Check for cleanliness.
-
Fill motor oil. Refer to => [ Engine Oil, Filling ] See: Engine Oil, Filling