R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-559002.png)
-
Remove oil temperature sensor 2 (G664).
Installing
‹› Tightening specifications, refer to => [ Upper Engine Oil Cooler, Oil Check Valves and Spray Nozzle Valve Assembly Overview ] See: Engine
Lubrication/Oil Cooler/Service and Repair/Upper Engine Oil Cooler, Oil Check Valves and Spray Nozzle Valve Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace O-rings.
-
Install the upper section of the intake manifold.