R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-561003.png)
-
Remove the locking bolt - arrow - for the TDC marking from the suction module.
-
Install the (3242) into the groove - 1 - to 20 Nm. If necessary, move the crankshaft back and forth slightly to center the bolt.
-
Press the left camshaft timing chain tensioner guide rails in as far as the stop using a screwdriver - 1 - and secure the chain tensioner with a
(T40071).
‹› The toothed belt tensioner is lubricated with oil and should only be compressed slowly by applying constant pressure.
-
Press the right camshaft timing chain tensioner guide rails in as far as the stop using a screwdriver - 1 - and secure the chain tensioner with a
