R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-561009.png)
-
Tighten bolt - 2 - to exhaust camshaft to final torque.
-
Remove the (3242).
-
Using the (T40058), turn the crankshaft two turns in the direction of engine rotation - arrow - until it is back at TDC.
‹› If it is accidentally rotated beyond TDC, rotate it back approximately 30° and set it to TDC again.
‹› The threaded holes - arrows - in the camshafts must face upward.
