R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-561010.png)
-
Install the (T40070) in both cylinder heads and tighten the bolts - arrows - to 25 Nm.
‹› The (T40070) is correctly positioned when the holes for the cylinder head bolts remain free.
-
Install the (3242) into the groove - 1 - to 20 Nm.
‹› The (3242) must engage in the locating groove of the crankshaft, otherwise repeat the adjustment.
-
Remove the camshaft locating pins on both cylinder heads.
