R8 Quattro Coupe V10-5.2L (BUJ) (2010)
1
Pivot Pin for Drive Sprocket
‹› For the right camshaft timing chain
‹› Asymmetrical version
‹› Installed location
2
Bolt
‹› 42 Nm
3
Camshaft Adjuster for Exhaust Camshaft
‹› Identification exhaust
‹› Removing and installing, refer to => [ Camshaft Timing Chains ] See: Camshaft Timing Chains
4
Camshaft Bolt
‹› Replace
‹› Pre-tightening specification: 60 Nm
‹› Final tightening specification: 80 Nm plus an additional 90° turn
5
Camshaft Bolt
‹› Replace