Audi Workshop Service and Repair Manuals > R8 Quattro Coupe V10-5.2L (BUJ) (2010) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Camshaft Timing Chains, Removing From Camshafts

Camshaft Timing Chains, Removing From Camshafts|Page 1965 > < Camshaft Timing Chains, Removing From Camshafts|Page 1963

Page 3

Press the guide rails for the left and right camshaft timing chain tensioner in - arrow - as far as the stop and secure the chain tensioner with a
(T40071).

Clean the oil strainer - 2 - in both chain tensioners if necessary.

‹› Pay close attention when installing the oil screen on the groove in the chain tensioner.

Mount and attach the rear seal - 3 - onto the chain tensioner - 1 -.

Left Camshaft Timing Chain:

Position the left camshaft timing chain according to the markings made during removal as shown in the illustration.

Fasten bolts - 1 - and - 2 -.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 1964

Camshaft Timing Chains, Removing From Camshafts|Page 1965 > < Camshaft Timing Chains, Removing From Camshafts|Page 1963

Audi Workshop Service and Repair Manuals

R8 Quattro Coupe V10-5.2L (BUJ) (2010)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts Page 1964

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts Page 1964

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 1964

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 1964