R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-571004.png)
CAUTION!
The lubrication system could be plugged with excess sealant.
‹› Do not apply sealant bead thicker than indicated.
-
Apply a sealant bead - arrow - to the clean sealing surface of the timing chain left cover as shown in the illustration.
‹› Sealant bead thickness: 2.5 mm
‹› The timing chain cover must be installed within 5 minutes after applying the sealant
-
Position the timing chain left cover and the bracket - arrow A - and - arrow B -.
