R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Clean the sealing surfaces; they must be free of oil and grease.
‹› Note the expiration date of the sealing compound.
-
Cut the tube nozzle at the front marking (nozzle diameter approximately 2 mm).
CAUTION!
The lubrication system could be plugged with excess sealant.
‹› Do not apply sealant bead thicker than indicated.
-
Apply a sealant bead - arrow - to the clean sealing surface of the right timing chain cover as shown in the illustration.