Audi Workshop Service and Repair Manuals > R8 Quattro Coupe V10-5.2L (BUJ) (2010) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Actuator | Component Information | Testing and Inspection | Camshaft Adjustment Valve 1, Exhaust

Page 2

Checking internal resistance

Using a Multimeter, check the Camshaft Adjustment Valve 2 (N208) terminals 1 to 2 for resistance.

Specified value: 5.0 to 8.0 ohms (at approx. 20° C)

If the specified value was not obtained:

Replace Camshaft Adjustment Valve 2 (N208). Refer to appropriate repair information.

If the specified value was obtained:

Audi Workshop Service and Repair Manuals