R8 Quattro Coupe V10-5.2L (BUJ) (2010)
CAUTION!
Place Ignition Coil Puller (T40039) on top rib - arrow - of ignition coil and pull this from spark plug. Placing on bottom rib can cause damage.
Both Cylinder Banks
-
Switch ignition off.
-
Remove the engine compartment trim. Refer to => [ Engine Compartment Trim, Removing and Installing ] .
Cylinder Bank 1, Right:
-
Remove screws - 5 -.
-
Move the coolant reservoir slightly forward - arrow - and remove it.
-
Tie the coolant reservoir with the coolant hoses - 1, 3 and 4 - and connectors still attached - 2 - to the rear lid.