R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Heat Shield: Service and Repair
Left Fuel Tank Chamber Heat Shield
Left Fuel Tank Chamber Heat Shield
Removing
Proceed as follows:
‹› The engine is removed.
-
Remove the oil cooler coolant lines toward the outside and lay them aside.
-
Remove the brake booster vacuum line.
-
Remove the oil cooler oil line.
-
Remove the power steering hydraulic lines.
-
Remove the heat shield nuts - 1 - and - 2 -.
-
Remove the bolts - arrows - and the left fuel tank chamber heat shield.
Installing
‹› Tightening specifications => [ Heat Shield Assembly Overview ] See: Heat Shield Assembly Overview.
Installation is reverse of removal.