R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Cabin Ventilation Grille: Service and Repair
Passenger Compartment Forced Air Extraction
Removing
-
Remove the sill panel trim.
-
Remove the sill panel trim mount. R
-
Release the retaining clips and remove the forced air extraction ventilation frames - A -.
Installing
-
The ventilation frames - A - can only be installed in one position to ensure the sealing lips - B - close correctly.
‹› The smaller angle - arrow - is at the top.
-
When installing, press the ventilation frames - A - into the opening on the sill panel until all the retaining tabs engage securely.
-
Install the sill panel trim mount.
-
Install the sill panel trim.