R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Outside Air Temperature Sensor
Removing
-
Pull the right side of the lower air inlet grille - 1 - forward - arrow -, reaching into the opening under the brace.
-
Remove the lower air inlet grille from the bumper.
-
Disconnect electrical connector - 2 -.
-
Press the retaining clips together carefully - arrow - and remove the outside air temperature sensor (G17) from the bracket - 1 -.
Installing
Install in reverse order.