R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Left Vent Temperature Sensor
Removing
-
Switch off ignition.
-
Remove the driver side instrument panel cover.
-
Remove the center console left side trim.
-
Remove the bolt - B - and the footwell vent air channel - A -.
-
Mark the electrical connector - B - to the Left Vent Temperature Sensor (G150) (there is a risk of switching it with other identical connectors).
-
Disconnect the electrical connector - B - on the left vent temperature sensor - A -.
-
Turn the left vent temperature sensor - A - counterclockwise - arrow - and remove it from the A/C unit.