R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Dashboard / Instrument Panel: Service and Repair
Left Instrument Panel Vent
Left Instrument Panel Vent
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removal
-
Remove the left upper A-pillar trim. Refer to => [ Upper A-pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Service and
Repair/Removal and Replacement/Interior Trim.
-
Using a screwdriver, raise the corner of the upper instrument panel vent slightly and release it with the (3409).
-
Using the (3409), unclip the top of the instrument panel vent first - arrows -.
-
Unclip the bottom of the instrument panel vent - arrow - and remove it from the instrument panel.
Installation
Installation is reverse of removal, but note the following:
-
When sliding the instrument panel vent into the panel, make sure the air duct engages correctly.
-
Press the instrument panel vent into the installation opening as far as the stop.