R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-2693005.png)
Tip: If the material is not placed correctly, the customer concern for noise may recur.
6. The remaining strips must be installed on the corners of the center brake light. Push the strips under the seal as shown in Figure 10.
7. Brush all four strips with the wax for the brake light (part number D 308 SP5 A1) and install the light according to the repair manual.
8. Ensure that the center brake light is correctly installed. The corners of the brake light must not touch the body.
