R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Disconnect the electrical wire - 3 - by releasing the retaining spring - arrow A -.
-
Remove the daytime running lamp and parking lamp LED module.
Installing
‹› Tightening specification, refer to => [ Bi-Xenon HID Headlamps Assembly Overview ] See: Headlamp/Service and Repair/Removal and
Replacement/Bi-Xenon HID Headlamps Assembly Overview.
Install in reverse order of removal, observing the following:
-
Check the seal - 1 - between the LED module and headlamp housing.
-
Install headlamp. Refer to => [ HID Headlamp Housing ] See: Headlamp/Service and Repair/Removal and Replacement/HID Headlamp Housing.